Welcome to Jiangsu Huaqi aluminum Polytron Technologies Inc official website.!

service hotline:

+86-0516-83892255/+86-0516-83882188

My position:Home - Products center - Aluminium alloy element additive - HT - Cu75 copper agent

prev
next

name:HT - Cu75 copper agent

time:2018-11-3 15:17:45


Introduction

Of the goods

model

use

Method of use

characteristic

The process parameters

specifications

Titanium boron agent

HT-Ti4OB4

Adjust the composition of alloying elements to replace the aluminum intermediate alloy.

According to the production of alloy element content in the alloy and the results of the analysis before furnace, calculated at 95% of the recovery efficiency is good, need to add dose, after grilled slag, aluminum evenly dispersed bubble into the molten pool directly, after being small flame disappeared, should be appropriate to strengthen artificial stirring, make its spread evenly, and according to the actual situation, the spread of the guarantee time.

The elements are 75% and the silicon is 95%.
The yield is greater than 95%.
The solid yield of iron agent is over 90%.
Shelf life is one year.

Temperature: 740 ℃ to 760 ℃.
Melt time: 15 to 30 minutes.

1, 500 g/piece
Density: 3.8-4.2 kg/cm after
Si: 2.5 g/cm after

Titanium agent

HT-Ti75

Manganese agent

HT-Mn75

Copper agent

HT-Cu75

iron

HT-Fe75

Chromium agent

HT-Cr75

Nickel agent

HT-Ni75

zinc

HT-Zn75

Fast solvent

HT-Si95

PREV:HT - Ti40B4 titanium boron agent
NEXT:nothing!

go back

RELATED NEWS

Guess you're interested